Wireless DMX / RDM device (transmitter and receiver), IP67

AIR-BRIDGE-DMX is a wireless transmitter and receiver powered by a LumenRadio module with concurrent Bluetooth that converts the DMX protocol into a wireless signal. Concurrent Bluetooth enables easy setup, configuration and lighting control with portable devices via the LumenRadio CRMX Toolbox© mobile application.
. AIR-BRIDGE-DMX uses wireless signals to quickly transmit data packets from a transmitter to a receiver (usually near lighting fixtures). Instead of relying on traditional DMX cables, AIR-BRIDGE-DMX optimizes communication wirelessly, reducing setup time and costs for live productions. It's like converting normal wired DMX into a wireless signal, the way digital wireless microphones work. The data from the controller is fed into a DMX port on the wireless transmitter and the data is transmitted wirelessly through the air. AIR-BRIDGE DMX transmitters can be easily paired with other receivers using external push buttons to connect master transmitters (TX) and slave receivers (RX).
. With the LumenRadio CRMX Toolbox© mobile application, it is possible to set up and configure several parameters of the AIR-BRIDGE-DMX, such as the transmitter (TX) or receiver (RX) operating modes.
. The LumenRadio CRMX Toolbox© can be downloaded free of charge from the Apple App Store and Google Play Store.

Technical data

• LumenRadio wireless DMX transmitter and receiver
• Input voltage: typically 230 Vac @50Hz, range (85 ÷ 305) Vac
• Transmits a complete DMX universe with RDM functions
• Button for external link
• Simultaneous Bluetooth Low Energy functions
• Over-the-air software upgrades
• Isolated DMX512 input/output
• Device configuration via the LumenRadio CRMX Toolbox© mobile application
• Operating modes: Receiver (RX), Transmitter (TX)
• IP67 housing with external SMA antenna (IP67)
• Dimensions: 90x90x65mm (without antenna)
• 100% function test
• 5 year guarantee