5 in 1 torque adapter 2.0-6.0 Nm, 6kt 1/4 inch on both sides

Turn your ¼ inch bit and a holder into your perfect torque tool from 2.0 to 6.0 Nm. One adapter for five different tightening strengths. The adapter can be clamped between any standard holding tool and a bit. Turn the handle clockwise until the required torque is reached on the scale. The adapter is primarily suitable for manual operation and not for loosening screw connections.

Always set the adapter to the zero scale after use. The adapters are tested in accordance with DIN EN ISO 6789 (hand-operated torque screwdriving tools) and have a tolerance of ± 10% for at least 20,000 clicks. The torque value should be checked regularly by the user using a torque meter.

Technical data

• Visual display of the torque values
• Turn until the value on the scale is reached
• Tightening torque 2.0-6.0 Nm / 20.4-61.1 Kgfcm / 17.7-53.1 in-lb
• Bit magnet holder 1/4 inch hexagon 6.35 mm (DIN 3126)
• Output 1/4 inch hex. shank 6.35 mm (DIN 3126)
• Adapter Ø 18 mm
• Adapter length 10 mm (without shaft)
• Alloy steel material
• Total length 68.8 mm
• Weight 105 g